Cookie-Einstellungen
Diese Website benutzt Cookies, die für den technischen Betrieb der Website erforderlich sind und stets gesetzt werden. Andere Cookies, die den Komfort bei Benutzung dieser Website erhöhen, der Direktwerbung dienen oder die Interaktion mit anderen Websites und sozialen Netzwerken vereinfachen sollen, werden nur mit Ihrer Zustimmung gesetzt.
8001640
OIL COOLER, 5 Row 6In Long Core
Verfügbarkeit
Bestellbar aber Preise können abweichen
Zustand
new
Zertifikatsart
8130-3
Beschreibung 8001640
For Aircraft: Grumman AA-5, many Beech, many Cessna, Mooney, Robinson and others
Direct Replacements for Stewart Warner (Meggitt) Oil Coolers AERO-Classics HE Series High Efficiency Oil Coolers
Don't be fooled by Stewart Warner oil coolers available from many aviation suppliers. Even though its the same part number and manufacturer, if it did not come from the aircraft manufacturer or say FAA-PMA, then it is not FAA approved.
Manufacturer Installation Tips: Mounting Flanges Be sure to mount the cooler using all four mounting flanges. This will evenly distribute stress that can cause cracking.
Threads and Hoses On pipe (tapered) threads, Anti-seize lubricant should always be used to prevent thread galling. Steel fittings are an additional added measure that can prevent thread galling. Avoid damage to the oil cooler during operation. Hoses connecting to the oil cooler should be installed, supported, and tied down in a manner that will avoid vibration and pulling stresses being induced onto the oil cooler. Hoses must be fastened to the same structure that the cooler is attached to. If the cooler is mounted to the airframe structure, the hoses must be supported by the airframe structure. If the cooler is attached to the engine structure, the hoses must be supported by the engine structure. Do not allow engine movement stresses to be induced into the cooler through the hoses. A back-up wrench should always be used when installing fittings into any oil cooler to prevent damage to the oil cooler. Please note (if applicable) the threads on this part have been inspected by the manufacturer before shipment and found to be in conformity.
Details
Ursprungsland | US |
Zertifikatsart | 8130-3 |
Zustand | new |
KN8-Nummer | 84091000 |
Gewicht | 1.043 kg |
Downloads
Bitte einloggen